DSpace@nitr >
National Institue of Technology- Rourkela >
Journal Articles >

Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/479

Full metadata record

DC FieldValueLanguage
contributor.authorSubudhi, B-
contributor.authorMorris, A S-
identifier.citationRobotics and Autonomous Systems, Vol 41, No 4, p 257–270en
descriptionCopyright for this paper belongs to the Elsevier Science.en
description.abstractThe paper presents a dynamic modelling technique for a manipulator with multiple flexible links and flexible joints, based on a combined Euler–Lagrange formulation and assumed modes method. The resulting generalised model is validated through computer simulations by considering a simplified case study of a two-link flexible manipulator with joint elasticity. Controlling such a manipulator is more complex than controlling one with rigid joints because only a single actuation signal can be applied at each joint and this has to control the flexure of both the joint itself and the link attached to it. To resolve the control complexities associated with such an under-actuated flexible link/flexible joint manipulator, a singularly perturbed model has been formulated and used to design a reduced-order controller. This is shown to stabilise the link and joint vibrations effectively while maintaining good tracking performance.en
format.extent1031207 bytes-
publisherElsevier Scienceen
subjectFlexible linken
subjectFlexible jointen
subjectSingular perturbationen
titleDynamic modelling, simulation and control of a manipulator with flexible links and jointsen
Appears in Collections:Journal Articles

Files in This Item:

File Description SizeFormat
robotics_autoBDS.pdf1007KbAdobe PDFView/Open

Show simple item record

All items in DSpace are protected by copyright, with all rights reserved.


Powered by DSpace Feedback