Mechanical and dry sliding wear behavior of cenosphere particulate reinforced Al-Si12 matrix alloy composites produced by squeeze casting

Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/3079

Full metadata record

DC Field	Value	Language
dc.contributor.author	Bera, Tanusree	-
dc.contributor.author	Acharya, S.K	-
dc.date.accessioned	2018-10-24T05:22:44Z	-
dc.date.available	2018-10-24T05:22:44Z	-
dc.date.issued	2018-09	-
dc.identifier.citation	6th Asia International Conference on Tribology (ASIATRIB 2018), Kuching, Malaysia, 17-20 September, 2018	en_US
dc.identifier.uri	http://hdl.handle.net/2080/3079	-
dc.description	Copyright of the documents belongs to the proceedings publisher.	en_US
dc.description.abstract	In this study, the effects of weight fraction of cenosphere on dry sliding wear behavior of Al-Si12 matrix alloy particle reinforced composites, fabricated by squeeze casting technique was investigated. Wear tests were carried out on a pin-on-disc wear tester at 0.5235, 1.0472, 1.5708 and 2.0944 m/s sliding velocity under loads of 5, 10, 15 and 20 N against EN 31 steel disc. The results showed that the higher the load and the faster the sliding velocity are, the higher the wear rate is. The coefficient of friction of the matrix alloy and composites decreased with increase with the load.	en_US
dc.subject	Al-Si12 matrix alloy	en_US
dc.subject	Cenosphere	en_US
dc.subject	Squeeze casting	en_US
dc.title	Mechanical and dry sliding wear behavior of cenosphere particulate reinforced Al-Si12 matrix alloy composites produced by squeeze casting	en_US
dc.type	Article	en_US
Appears in Collections:	Conference Papers

Files in This Item:

File	Description	Size	Format
2018_ASIATRIB_SKAcharya_Mechanical.pdf	Paper	149.99 kB	Adobe PDF	View/Open
2018_ASIATRIB_SKAcharya_Mechanical_Presentation.pdf	Presentation	1.09 MB	Adobe PDF	View/Open