DSpace@nitr >
National Institue of Technology- Rourkela >
Conference Papers >

Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/280

Full metadata record

DC FieldValueLanguage
contributor.authorMohanty, J R-
contributor.authorJoni, A-
contributor.authorRay, P K-
contributor.authorVerma, B B-
identifier.citationRecent Trends in Mechatronics, Nanotechnology and Robotics (RTMNR), April 15-16, 2006, Rourkela, Indiaen
descriptionCopyright for this article belongs to National Institute of Technology, Rourkela, Indiaen
description.abstractThe INSTRON DaDN software has the provision to use the compliance method of crack growth measurement for standard specimens. The relationship between compliance and crack length is given in the form of a polynomial equation whose coefficients assume different values for different specimen geometries. In the present work an attempt has been made to determine the coefficients for a non-standard (single-edge-notch tension) specimen using experimental data and also by Finite Element Method (FRANC2D software). It is found that the coefficients obtained by Finite Element method gives better crack length estimates for the above specimen geometry in comparison to the coefficients obtained experimentally.en
format.extent127186 bytes-
publisherNational Institute of Technology, Rourkela, Indiaen
titleDetermination of Crack Coefficients for a Single Edge-Notch Tension Specimen Using Franc2D Programen
Appears in Collections:Conference Papers

Files in This Item:

File Description SizeFormat
paper-78.pdf124KbAdobe PDFView/Open

Show simple item record

All items in DSpace are protected by copyright, with all rights reserved.


Powered by DSpace Feedback