Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPattanaik, A-
dc.contributor.authorMishra, S C-
dc.identifier.citationJournal of Materials and Metallurgical Engineering (2013) 1-10en
dc.identifier.issn2231 - 3818-
dc.descriptionCopyright belongs to STM journalen
dc.description.abstractIndustrial waste like fly-ash is mainly used as a good building material due to its low weight. But the main disadvantage of these bricks is its low compressive strength. So, a lot of research is going on to increase the strength of these bricks. Normal clay is used for making of bricks in a cheaper sense. So, a research is carried out to develop a new systematic procedure to produce a new type of brick which will have higher compressive strength than the normal clay bricks. Here the fly-ash is mixed with clay at different compositions, sintered at different temperatures and their microstructural analysis has been carried out to find out a solution to enhance its property.en
dc.format.extent529412 bytes-
dc.publisherSTM Journalsen
dc.subjectcompressive strengthen
dc.titleMicro-structural Analysis of Fly Ash and Clay Compactsen
Appears in Collections:Journal Articles

Files in This Item:
File Description SizeFormat 
Microstructural Analysis Of Fly Ash 3934-9875-1-RV.pdf517 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.