DSpace@nitr >
National Institue of Technology- Rourkela >
Conference Papers >

Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/1542

Full metadata record

DC FieldValueLanguage
contributor.authorBiswas, C K-
contributor.authorPradhan, M K-
date.accessioned2011-10-21T09:21:41Z-
date.available2011-10-21T09:21:41Z-
date.issued2011-09-
identifier.citationInternational Conference on Manufacturing Science and Technology, ICMST 2011, will be held during September 16-18, 2011, in Singaporeen
identifier.urihttp://hdl.handle.net/2080/1542-
descriptionCopyright belongs to proceeding publisheren
description.abstractObjective of the present work is to model EDM process using ANSYS software, and to investigate the effects of most significant machining parameters (pulse current and pulse duration) on the residual stresses developed in the beneath the spark produced by a single spark. The workpiece material is AISI D2 tool steel. The FEA model is then used to study the relation between these parameters and maximum temperature attended at the end of heating cycle along with residual stress produced at the end of cooling cycle. To establish the residual stresses in the work piece during EDM, the temperature distribution at the end of pulse duration in the work piece has to be estimated first, latter on after cooling the residual stress is determined. In addition, residual stress, which is the main aspect responsible for component failure, and the location of tensile peak stress, at the end of cooling cycle, are investigated.en
format.extent436014 bytes-
format.mimetypeapplication/pdf-
language.isoen-
subjectEDMen
subjectresidual stressen
subjectFEMen
titleFEM of Residual stress of EDMed Surfacesen
typeArticleen
Appears in Collections:Conference Papers

Files in This Item:

File Description SizeFormat
FEM of Residual stress.pdf425KbAdobe PDFView/Open

Show simple item record

All items in DSpace are protected by copyright, with all rights reserved.

 

Powered by DSpace Feedback