DSpace@nitr >
National Institue of Technology- Rourkela >
Journal Articles >

Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/1118

Title: Wear Characteristics of Plasma Sprayed Nickel–Aluminum Composite Coatings
Authors: Mishra, S C
Satapathy, Alok
Chaithanya, M
Ananthapadmanabhan, P V
Sreekumar, K P
Keywords: NiAl coating,
plasma spraying,
erosion wear,
Issue Date: 2009
Publisher: Sage
Citation: Journal of Reinforced Plastics and Composites, Volume 28(23), December 2009, Pages 2931-2940
Abstract: In the present investigation plasma spray intermetallic coating of nickel–aluminide was deposited on mild steel substrates. The response of plasma sprayed nickel–aluminide coatings to the impingement of solid particles has been presented in this study. Nickel pre-mixed with alumina powder is deposited on mild steel substances by atmospheric plasma spraying at various operating power level. The coatings are subjected to erosion wear test. Dry silica sand of average particle size 400 mm is used as the erodent. The erosion rate is calculated on the basis of coating mass loss. The erosion studies are made at different velocities and impingement angles. It is observed that, the erosion wear is strongly influenced by the angle of impact. The test is conducted at room temperature, i.e., at 278C and 60% RH. Coatings deposited at different power levels are found to exhibit different wear rates under similar test conditions. Microstructure of the coating is analyzed with SEM.
URI: http://dx.doi.org/10.1177/0731684408094067
Appears in Collections:Journal Articles

Files in This Item:

File Description SizeFormat
SC-Mishra.pdf713KbAdobe PDFView/Open

Show full item record

All items in DSpace are protected by copyright, with all rights reserved.


Powered by DSpace Feedback