|
DSpace@nitr >
National Institue of Technology- Rourkela >
Journal Articles >
Please use this identifier to cite or link to this item:
http://hdl.handle.net/2080/1118
|
Full metadata record
| DC Field | Value | Language |
|---|
| contributor.author | Mishra, S C | - |
| contributor.author | Satapathy, Alok | - |
| contributor.author | Chaithanya, M | - |
| contributor.author | Ananthapadmanabhan, P V | - |
| contributor.author | Sreekumar, K P | - |
| date.accessioned | 2009-12-29T09:32:38Z | - |
| date.available | 2009-12-29T09:32:38Z | - |
| date.issued | 2009 | - |
| identifier.citation | Journal of Reinforced Plastics and Composites, Volume 28(23), December 2009, Pages 2931-2940 | en |
| identifier.uri | http://dx.doi.org/10.1177/0731684408094067 | - |
| identifier.uri | http://hdl.handle.net/2080/1118 | - |
| description.abstract | In the present investigation plasma spray intermetallic coating of nickel–aluminide
was deposited on mild steel substrates. The response of plasma sprayed nickel–aluminide coatings to the impingement of solid particles has been presented in this study. Nickel pre-mixed with alumina powder is deposited on mild steel substances by atmospheric plasma spraying at various operating power level. The coatings are subjected to erosion wear test. Dry silica sand of average particle size 400 mm is used as the erodent. The erosion rate is calculated on the basis of coating mass loss.
The erosion studies are made at different velocities and impingement angles. It is observed that, the erosion wear is strongly influenced by the angle of impact. The test is conducted at room
temperature, i.e., at 278C and 60% RH. Coatings deposited at different power levels are found to
exhibit different wear rates under similar test conditions. Microstructure of the coating is analyzed with SEM. | en |
| format.extent | 730814 bytes | - |
| format.mimetype | application/pdf | - |
| language.iso | en | - |
| publisher | Sage | en |
| subject | NiAl coating, | en |
| subject | plasma spraying, | en |
| subject | erosion wear, | en |
| subject | coating | en |
| title | Wear Characteristics of Plasma Sprayed Nickel–Aluminum Composite Coatings | en |
| type | Article | en |
| Appears in Collections: | Journal Articles
|
Files in This Item:
| File |
Description |
Size | Format |
|---|
| SC-Mishra.pdf | | 713Kb | Adobe PDF | View/Open |
|
Show simple item record
All items in DSpace are protected by copyright, with all rights reserved.
|
