DSpace@nitr >
National Institue of Technology- Rourkela >
Conference Papers >

Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/985

Full metadata record

DC FieldValueLanguage
contributor.authorPanda, S S-
contributor.authorMahapatra, S S-
date.accessioned2009-08-03T09:40:53Z-
date.available2009-08-03T09:40:53Z-
date.issued2009-08-03T09:40:53Z-
identifier.citationAIMS Int. Conf., Noida, New Delhi-
identifier.urihttp://hdl.handle.net/2080/985-
description.abstractIn the present work, optimization technique such as Grey based Taguchi methods have been used to predict surface roughness of drilled holes and drill flank wear into a single characteristic response. Experiments have been conducted in a radial drilling machine with five input parameters using L27 orthogonal array. Minimum flank wear and average surface roughness is the required objective parameter. It has been observed that combined response affected by almost all input parameters, but drill diameter is most significant and feed is least significant input parameter influencing the combined responsesen
format.extent157184 bytes-
format.mimetypeapplication/msword-
language.isoen_US-
relation.ispartofseries-
titleParametric optimisation of multi response drilling process using Grey based Taguchi methoden
Appears in Collections:Conference Papers

Files in This Item:

File Description SizeFormat
manuscript-1.pdf49KbAdobe PDFView/Open

Show simple item record

All items in DSpace are protected by copyright, with all rights reserved.

 

Powered by DSpace Feedback