Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/644
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPratihar, S K-
dc.contributor.authorSharma, A D-
dc.contributor.authorBasu, R N-
dc.contributor.authorMaiti, H S-
dc.date.accessioned2008-03-18T10:47:33Z-
dc.date.available2008-03-18T10:47:33Z-
dc.date.issued2004-
dc.identifier.citationJournal of Power Sources, Vol 129, Iss 2, P 138-142en
dc.identifier.urihttp://dx.doi.org/10.1016/j.jpowsour.2003.11.023-
dc.identifier.urihttp://hdl.handle.net/2080/644-
dc.descriptionCopyright for the article belongs to Elsevieren
dc.description.abstractNickel-yttria stabilized zirconia (Ni-YSZ) cermet is widely used as an anode material for solid oxide fuel cells (SOFCs). While the nickel-to-nickel chain maintains the electrical conductivity path, the YSZ contributes to lowering the thermal expansion and inhibits nickel coarsening during high temperature (1000 °C) operation. An electroless technique is employed to prepare a uniform nickel coating on the YSZ powder. The process parameters for this technique are optimized. Notably, the cermet thus prepared shows percolation at a much lower nickel content (10–20 vol.%) compared with those reported in the literature.en
dc.format.extent217461 bytes-
dc.format.mimetypeapplication/pdf-
dc.language.isoen-
dc.titlePreparation of nickel coated YSZ powder for application as an anode for solid oxide fuel cellsen
dc.typeArticleen
Appears in Collections:Journal Articles

Files in This Item:
File Description SizeFormat 
pratihar-power.pdf212.36 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.