DSpace@nitr >
National Institue of Technology- Rourkela >
Journal Articles >

Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/580

Full metadata record

DC FieldValueLanguage
contributor.authorSeal, A-
contributor.authorMazumder, R-
contributor.authorSen, A-
contributor.authorMaiti, H S-
date.accessioned2008-01-09T04:22:08Z-
date.available2008-01-09T04:22:08Z-
date.issued2006-
identifier.citationMaterials Chemistry and Physics, Vol 97, Iss 1, P 14-18en
identifier.urihttp://dx.doi.org/10.1016/j.matchemphys.2005.05.038-
identifier.urihttp://hdl.handle.net/2080/580-
descriptionCopyright for the article belongs to Elsevieren
description.abstractA fast firing technique for densification of PZT (up to 97% of theoretical density) at a low temperature (950 °C) has been found out. A small amount of excess PbO (3–5 wt.%) and a fast firing schedule are required to achieve the desired sintering. The final composition of the sintered ceramics can be kept close to the morphotropic phase boundary by modifying the firing time and post-sintering annealing treatment at 800 °C. The g33 values of fast fired samples are comparable to those of conventionally sintered samples, though the d33 values are somewhat lower than those reported for conventionally sintered (at 1250 °C or above) samples.en
format.extent886072 bytes-
format.mimetypeapplication/pdf-
language.isoen-
publisherElsevieren
subjectDielectric propertiesen
subjectPiezoelectricityen
subjectElectronic materialsen
subjectFast-firingen
titleFast firing of lead zirconate titanate ceramics at low temperatureen
typeArticleen
Appears in Collections:Journal Articles

Files in This Item:

File Description SizeFormat
MatChem-rana.pdf865KbAdobe PDFView/Open

Show simple item record

All items in DSpace are protected by copyright, with all rights reserved.

 

Powered by DSpace Feedback