DSpace@nitr >
National Institue of Technology- Rourkela >
Journal Articles >

Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/40

Full metadata record

DC FieldValueLanguage
contributor.authorBhattacharyya, S-
contributor.authorPratihar, S K-
contributor.authorSinha, R K-
contributor.authorBehera, R C-
contributor.authorGanguly, R I-
identifier.citationMaterials Letters, Vol 53, Iss 6, P 425-431en
descriptionCopyright of this article belongs to Elsevier Science Ltden
description.abstractMicrocomposites of alumina and zirconia containing equal volume fractions of the two are prepared by a combined gel-precipitation route using aluminium chloride and zirconium oxychloride as precursors. Dried gel powders calcined between 375 and 800 °C show cubic phase as the only crystalline phase. Zirconia gets converted to tetragonal phase above 900 °C and is retained mostly in this form upto 1000 °C. At the higher temperatures, it converts to the monoclinic phase. Alumina starts to crystallize into -form at 900 °C and is converted to -form at 1250 °C. Pressed pellets sintered at 1400 °C achieve densities close to theoretical in 4 h. Microstructures show evidence of segregation and coarsening in a composite matrix of alumina and zirconia mixed at a submicron level.en
format.extent476745 bytes-
subjectAlumina–zirconia microcompositesen
subjectPowder processingen
titlePreparation of alumina–high zirconia microcomposite by combined gel-precipitationen
Appears in Collections:Journal Articles

Files in This Item:

File Description SizeFormat
bhatta4.pdf465KbAdobe PDFView/Open

Show simple item record

All items in DSpace are protected by copyright, with all rights reserved.


Powered by DSpace Feedback