Please use this identifier to cite or link to this item:
Title: High Density Polyethylene (HDPE) and Polypropylene (PP) Polyblend: An Experimental Approach
Authors: Sutar, Harekrushna
Murmu, Rabiranjan
Dutta, Chiranjit
Ozcan, Mutlu
Mishra, Subash Chandra
Keywords: High density poly ethylene (HDPE)
Polypropylene (PP)
Thermal crystallization
Electrical properties
Strain rate
Issue Date: Sep-2019
Citation: New Advances in Materials Science and Engineering Vol. 1
Abstract: The present research focuses to evaluate a complete outlook of virgin high density polyethylene (HDPE) and polypropylene (PP) polyblends. Virgin PP of 10, 20, 30, 40 and 50 weight % is compounded with virgin HDPE. Tensile, Flexural and impact test specimens of virgin HDPE, Virgin PP and HDPE-PP composites are prepared via twin screw extruder and injection moulding methods as per ASTM D638-02a (Type-I), ASTM D790 and ASTM D256-A standards respectively. The mechanical properties like tensile strength, flexural strength, Izod impact strength are examined. Polymer sheets are fabricated using a two roll milling machine and compression moulding; and its electrical properties like dielectric strength, surface resistivity, volume resistivity are examined according to ASTM-D 257 standard. The study also includes effect of strain rate on tensile properties of the prepared composite at a cross head speed of 30, 40, 50, 60 and 70 mm/min. Design of experiment is conducted to find parameters dominating the tensile strength. All experiments are carried out at room temperature of 23°C and absolute humidity of 54%. Scanning electron microscopy (SEM), Atomic force microscopy (AFM) and polarised light microscopy (PLM) are used to observe the surface and crystal morphology. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) tests verify the non compatibility of both polymers. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) techniques are used to study the thermal behaviour of composites. The results manifest dielectric strength and volume resistivity decreases with addition of PP to HDPE; whereas surface resistivity increases. Co-occurring spherulites are seen for polyblends; indicating the composite to be a physical blend of continuous and dispersed phases, but on the other hand PP improves the tensile and flexural properties of HDPE.
URI: DOI: 10.9734/bpi/namse/v1
ISBN: 9789389246087 (Print)
9789389246261 (Online)
Appears in Collections:Book Chapters

Files in This Item:
File Description SizeFormat 
2019_BookChapter_SCMishra_9789389246261.pdfBook Chapter2.46 MBAdobe PDFView/Open    Request a copy

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.