Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/3066
Title: Characteristic parameters estimation of uncertainties present in an active magnetic bearing integrated flexible rotor system using dynamic reduction technique
Authors: Kuppa, Sampath Kumar
Lal, Mohit
Keywords: Active Magnetic Bearing
Dynamic Reduction
Full Spectrum
FFT Analysis
PID Controller
Issue Date: Sep-2018
Citation: 10th IFToMM International Conference on Rotor Dynamics (IFToMM 2018), Rio de Janeiro, Brazil, 23-27 September, 2018
Abstract: In this article, an identification algorithm is developed to estimate the characteristic parameters of uncertainties present in rotating machines. A dynamic system consists of two flexible shafts each having a rigid disc and an active magnetic bearing (AMB) at its mid–span, mounted on flexible bearings at ends and connected together with a flexible coupling is considered for numerical simulation. Finite element method (FEM) is used to obtain dynamic equations of motion (EOMs) for coupled flexible rotor system integrated with AMBs. An identification algorithm based on least squares technique is developed to estimate the characteristic parameters of uncertainties/faults (i.e., bearing, coupling and residual unbalance) present in the rotor system. FEM is more accurate and realistic approach to model real rotor test rigs but degrees of freedom (DOFs) of the system increases as the number of nodes increases. Accessibility of these DOFs and accurate displacement measurements are the most challenging problems in the real rotor test rigs. To overcome this difficulty, a dynamic reduction technique is applied in the developed identification algorithm to eliminate some linear and all angular DOFs (that are practically immeasurable and to avoid difficulties of number of sensors). A Proportional Integral Derivative (PID) controller is used to obtain the controlling current for AMBs to stabilize the rotor system. The EOMs derived is solved by fourth order Runge–Kutta method to generate the displacement and current responses. The time domain responses are converted into frequency domain using Fast Fourier Transform (FFT). Full spectrum analysis is performed to estimate the desired characteristic parameters. The effectiveness of the algorithm is checked for measurement error and found to be excellent
Description: Copyright of the document belongs to proceedings publisher.
URI: http://hdl.handle.net/2080/3066
Appears in Collections:Conference Papers

Files in This Item:
File Description SizeFormat 
2018_IFToMM_MLal_Characteristic.pdfConference paper466.07 kBAdobe PDFView/Open    Request a copy


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.