Please use this identifier to cite or link to this item:
Title: Solid Particle Erosion behavior of Rubber wood particulate Reinforced Epoxy Composite
Authors: Acharya, Samir Kumar
Vasunaik, D
Keywords: Solid particle erosion
Rubber wood
Reinforced epoxy composite
Issue Date: Dec-2017
Citation: 9th International Conference on Industrial Tribology (ICIT-2017), Kolkata, India, 6 - 9 December, 2017
Abstract: This work focuses on the mechanical properties and solid particle impact behaviour of Rubber wood particulate reinforced epoxy composite. Composites were prepared using the general hand lay-up technique with different weight fraction of particulates from 10-40wt% with a step of 10 wt% . The erosive wear test was carried out using an air jet erosion tester according to the ASTM G76 standard. The experimental parameters studied for the erosion rate of the RW epoxy composites were impingement angle (30° to 90°) and particle velocity (48 m/s to 109 m/s). Analysis of the results revealed that the composite behaves in a semi ductile nature. Possible erosion mechanisms were discussed using scanning electron microscopy (SEM).
Description: Copyright of this document belongs to proceedings publisher.
Appears in Collections:Conference Papers

Files in This Item:
File Description SizeFormat 
2017_ICIT_SKAcharya_Solid .pdfConference Paper333.64 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.