Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/1978
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKarak, S K-
dc.contributor.authorMajumdar, J D-
dc.contributor.authorWitczak, Z-
dc.contributor.authorLojkowski, W-
dc.contributor.authorManna, I-
dc.date.accessioned2013-08-16T11:09:23Z-
dc.date.available2013-08-16T11:09:23Z-
dc.date.issued2013-
dc.identifier.citationMaterials Science & Engineering A 580(2013)231–241en
dc.identifier.urihttp://hdl.handle.net/2080/1978-
dc.descriptionCopyright belongs to ElsevierB.V.en
dc.description.abstractThe present study reports synthesis of 1.0 wt % nano-Y2O3 dispersed high strength ferritic alloys with nominal compositions of 83.0Fe-13.5Cr-2.0Al-0.5Ti (alloy A), 79.0Fe-17.5Cr-2.0Al-0.5Ti (alloy B), 75.0Fe-21.5Cr-2.0Al-0.5Ti (alloy C) and 71.0Fe- 25.5Cr-2.0Al-0.5Ti (alloy D) (all in wt %) by mechanical alloying using planetary ball mill followed by consolidation of alloyed powders by hydrostatic extrusion at 1000°C and 550 MPa pressure with a strain rate ~ 10−1 s−1. The products of mechanical alloying and extrusion have been characterized by X-ray diffraction, scanning and transmission electron microscopy, energy dispersive spectroscopy and image analysis. Mechanical properties in terms of hardness, compressive strength, yield strength and Young’s modulus have been determined using nano-indenter and universal testing machine. The present ferritic alloys record significantly high levels of compressive strength (850-2226 MPa) and yield strength (525-1505 MPa), Young’s modulus (240-265 GPa) and hardness (14.7-17.8 GPa) with an impressive true strain (5.0-22.5 %). This extraordinary strength level measures up to 1.5 times greater strength, albeit with a lower density (~ 7.4 Mg/m3) than that of (< 1200 MPa) standard oxide dispersion strengthened ferritic alloys. Furthermore, the extent of plastic strain before failure in the present routine surpasses all previous attempts of identical synthesis but different consolidation routes for the same set of ferritic alloys. In general strength is higher along transverse than longitudinal direction of extrusion. It is conclude that uniform dispersion of nanometric (20-30 nm) Y2O3 (exsitu) or Y2Ti2O7 (in-situ) in high volume fraction along boundaries and within the grains of high-Cr ferritic matrix is responsible for this unique combination of high strength and ductility in the present alloys developed by powder metallurgy route.en
dc.format.extent192377 bytes-
dc.format.mimetypeapplication/pdf-
dc.language.isoen-
dc.publisherElsevier B.V.en
dc.subjectMechanical alloyingen
dc.subjecthydrostatic extrusionen
dc.subjectdispersion hardeningen
dc.subjectferritic alloyen
dc.subjectmicrostructureen
dc.subjectmechanical propertiesen
dc.titleMicrostructure and Mechanical Properties of Nano-Y2O3 Dispersed Ferritic Alloys Synthesized by Mechanical Alloying and Consolidated by Hydrostatic Extrusionen
dc.typeArticleen
Appears in Collections:Journal Articles

Files in This Item:
File Description SizeFormat 
Manuscript- Hydro-Extrusion-29.06.pdf187.87 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.