Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/187
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBera, J-
dc.contributor.authorSarkar, D-
dc.date.accessioned2005-12-29T08:54:37Z-
dc.date.available2005-12-29T08:54:37Z-
dc.date.issued2003-
dc.identifier.citationJournal of Electroceramics, Vol 11, Iss 3, P 131-137en
dc.identifier.urihttp://hdl.handle.net/2080/187-
dc.descriptionCopyright for this article belongs to Kluwer(now Springer) DOI:10.1023/B:JECR.0000026366.17280.0den
dc.description.abstractBarium titanate powder has been prepared via a semi-oxalate method that uses barium oxalate and TiO2 precursors, instead of titanyl oxalate. Barium oxalate was precipitated from nitrate solution onto the surface of TiO2 powders. Crystallization of BaTiO3 from the precursors was investigated by TGA, DTA and XRD analysis. It is evident that an intermediate barium oxycarbonate along with BaCO3, forms between 450–500°C and that decomposes to BaCO3 again at high temperature. Decomposition of BaCO3 occurs at much lower temperature, from 600°C onwards, due to the presence of TiO2. The precursor completely transforms into BaTiO3 at 900°C. Nanometer size BaTiO3 crystallites are produced during this synthesis due to the lower calcination temperature. The crystalline morphology of BaTiO3 is controlled mainly by the morphology of BaCO3, which formed in the intermediate stage.en
dc.format.extent595310 bytes-
dc.format.mimetypeapplication/pdf-
dc.language.isoen-
dc.publisherKluweren
dc.subjectBaTio3 synthesisen
dc.subjectCrystal morphologyen
dc.subjectOxalate-oxide reactionen
dc.subjectReaction kineticsen
dc.titleFormation of BaTiO3 from Barium Oxalate and TiO2en
dc.typeArticleen
Appears in Collections:Journal Articles

Files in This Item:
File Description SizeFormat 
sarkar1.pdf581.36 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.