DSpace@nitr >
National Institue of Technology- Rourkela >
Journal Articles >

Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/1720

Full metadata record

DC FieldValueLanguage
contributor.authorSwain, S K-
contributor.authorSen, S-
contributor.authorMishra, S C-
date.accessioned2012-07-05T05:20:25Z-
date.available2012-07-05T05:20:25Z-
date.issued2012-04-
identifier.citationEmerging Materials Research, Vol.1, No. 3, April-2012, pp. 140-145en
identifier.issn2046-0147-
identifier.other2046-0155-
identifier.urihttp://dx.doi..org/10.1680/emr.11.00019-
identifier.urihttp://hdl.handle.net/2080/1720-
descriptionCopyright for this article belongs to ICE Publisher, New Jersey, USAen
description.abstractThe mechanical properties achievable from spheroidal iron castings are adequate for a very wide range of applications. Apart from mechanical properties, a number of other characteristics such as density, thermal expansion, thermal conductivity, specific heat, electrical conductivity, magnetic properties and acoustic properties are also of considerable importance. Efforts are being made to improve all these properties. In the present investigation, five melts of SGI castings (M1 to M5) were prepared by standard foundry procedure and practices. The mechanical behavior of spheroidal graphite iron (SGI) castings was studied as a function of processing variables. It is found that the mechanical properties (viz.Tensile strength, Yield strength, Elongation, Impact resistance etc) for a given chemical composition are highly dependent on processing variables (i.e. pouring temperature, pre-conditioning of base iron, inoculation practice and molding materials). SGI castings are produced and tested as per ASTM 395 specifications. From the results, it is found that with varying processing conditions, the mechanical properties have been improved to a great extent; i.e., the UTS (Ultimate Tensile Strength), YS (Yield Strength), EL(Elongation) and impact strength (at -200C) . The UTS has improved to 475.41 MPa; YS is also enhanced to 316.94 MPa; elongation has increased to18%, but there is reduction in impact strength.en
format.extent1304730 bytes-
format.mimetypeapplication/pdf-
language.isoen-
publisherICE Publisheren
subjectSpheroidal Graphite ironen
subjectProcessing variablesen
subjectMechanical propertiesen
titleInfluence of processing variables on the mechanical behavior of spheroidal graphite cast ironen
typeArticleen
Appears in Collections:Journal Articles

Files in This Item:

File Description SizeFormat
EMR Paper.pdf1274KbAdobe PDFView/Open

Show simple item record

All items in DSpace are protected by copyright, with all rights reserved.

 

Powered by DSpace Feedback