DSpace@nitr >
National Institue of Technology- Rourkela >
Conference Papers >

Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/1618

Full metadata record

DC FieldValueLanguage
contributor.authorPadhi, P K-
contributor.authorSatapathy, Alok-
date.accessioned2012-02-16T15:08:57Z-
date.available2012-02-16T15:08:57Z-
date.issued2012-02-
identifier.citationInternational Conference on "Advancements in Polymeric Materials", APM 2012, February 10 -12, 2012, CIPET Ahmedabaden
identifier.urihttp://hdl.handle.net/2080/1618-
descriptionCopyright belongs to proceeding publisheren
description.abstractBlast furnace slag (BFS) is a major industrial waste generated in huge quantities during the extraction of iron from its ores in the blast furnace. Its potential as a filler material in polymeric matrices has not yet been reported and in view of this, the present work is undertaken to explore the possibility of making a class of erosion resistant polymer composites with the slag particles as the filler. Composites of four different compositions (with 0, 10, 20 and 30 wt% of BFS reinforced in epoxy resin) are prepared. Solid particle erosion wear trials are conducted following a well planned experimental schedule based on Taguchi’s design of experiments (DOE). Significant control factors predominantly influencing the wear rate are identified. This work shows that blast furnace slag possesses good filler characteristics as it improves the erosion wear resistance of the polymeric resin. Factors like filler content, impact velocity and impingement angle are the significant factors affecting the erosion wear rate. It is further seen that the use of Taguchi model with the prescribed design strategy is quite effective for the parametric appraisal of the wear process within a well defined experimental domain.en
format.extent208869 bytes-
format.mimetypeapplication/pdf-
language.isoen-
subjectPolymer compositesen
subjectEpoxyen
subjectBlast Furnace Slagen
subjectErosionen
subjectTaguchi Methoden
titleParametric Evaluation of Erosion Response of Epoxy Resin Filled with Blast Furnace Slag Using Taguchi Techniqueen
typeArticleen
Appears in Collections:Conference Papers

Files in This Item:

File Description SizeFormat
Full Paper APM 2012 -APM117.pdf203KbAdobe PDFView/Open

Show simple item record

All items in DSpace are protected by copyright, with all rights reserved.

 

Powered by DSpace Feedback