Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/1611
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAireddy, H-
dc.contributor.authorMishra, S C-
dc.date.accessioned2012-02-13T16:03:20Z-
dc.date.available2012-02-13T16:03:20Z-
dc.date.issued2011-06-
dc.identifier.citationJournal of Metallurgy and Materials Science, Vol. 53, No. 2, April-June 2011, pp. 139-152en
dc.identifier.issn0972-4257-
dc.identifier.urihttp://hdl.handle.net/2080/1611-
dc.descriptionCopyright for this paper belongs to National Metallurgical Laboratoryen
dc.description.abstractAn experimental study was conducted to investigate the erosive and abrasive wear behavior of coir dust filled epoxy resin matrix composites. The effect of coir dust concentration ,different impingement angles(30°,45°,60°,75°,and 90°),and various impact velocities(34,48,60,78,and 92m/sec) on the erosion rate of composite has been analyzed. The erodent used here is dry silica sand having the size range 200-600μm. However, it is found that the composite shows brittle type failure and maximum erosion rate is observed at 90° impingement angle. Erosion wear rate is decreased with increasing the coir dust amount.The abrasive wear property of the composite is examined on a pin-on-disc machine against 400μm grit size abrasive paper with test speed of 0.540 m/sec and at normal loads 5,10,15,20, and 25N. The effect of coir dust concentration and sliding distance on the weight loss of composites has been analyzed. Abrasive wear resistance decreases with increase in normal load and increases with increasing fiber content. Further, the erodent and abrasive worn surface morphology is examined by using scanning electron microscope (SEM), and possible wear mechanisms are discussed. The hardness and flexural strength of the composite also evaluated.en
dc.format.extent469775 bytes-
dc.format.mimetypeapplication/pdf-
dc.language.isoen-
dc.publisherNational Metallurgical Laboratoryen
dc.subjectCoir dusten
dc.subjectEpoxy resinen
dc.subjectErosion wearen
dc.subjectAbrasive wearen
dc.subjectImpingementen
dc.subjectSEMen
dc.titleTribological behavior and mechanical properties of Bio-waste reinforced polymer matrix compositesen
dc.typeArticleen
Appears in Collections:Journal Articles

Files in This Item:
File Description SizeFormat 
139-152.pdf458.76 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.