Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSahoo, B-
dc.contributor.authorSahoo, A-
dc.identifier.citationICME-2011 section of World Congress for Engineers-2011 held at London, UK during 6-8th July-2011 (WCE-2011)en
dc.descriptionCopyright belongs to proceeding publisheren
dc.description.abstractThe hydrodynamic behavior of the spouted bed has been studied by considering the different system parameters (viz. static bed height, spout diameter, particle size, gas velocity, particle density). Experiments were carried out using a Perspex column of 4 inch diameter. Attempts have been taken to develop correlations for the bed expansion / fluctuation ratios by varying different system parameters with the experimentally measured values of the bed dynamics on the basis of dimensional analysis. The experimental values of the expansion and fluctuation ratios were compared with the calculated results. The percentage deviations were observed to be within -15 to +15. A computer programmed was also done for the calculations of these bed dynamics theoretically. Theoretical results thus obtained through computer programming are compared with the calculated values obtained through the developed correlations on the basis of dimensional analysis approach as well as with the experimentally observed values of bed dynamics.en
dc.format.extent360220 bytes-
dc.subjectspouted beden
dc.subjectexpansion ratioen
dc.subjectfluctuation ratioen
dc.subjectdimensionless analysisen
dc.titleMathematical Modelling for Hydrodynamic Studies of Spouted beden
Appears in Collections:Conference Papers

Files in This Item:
File Description SizeFormat 
WCE-2011_A.pdf351.78 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.