Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAireddy, H-
dc.contributor.authorMishra, S C-
dc.identifier.citationInternational conference on advances in polymer science and rubber technology (APSRT) Challenges towards 2020 and beyond, March 3-5, 2011, Indian Institute of Technology, Kharagpuren
dc.descriptionCopyright belongs to proceeding publisheren
dc.description.abstractIn the present work coir dust reinforced epoxy matrix composites of different compositions (varying the amount of reinforcement) are prepared by hand lay-up method, at the room temperature. The abrasive wear property of the composites are examined in dry conditions on a pin-on-disc machine against 400μm grit size abrasive paper, with test speed of 0.540 m/sec and normal loads of 5,10,15,20, and 25N.The experimental results shown that, the abrasive wear resistance of the composite depends on the coir dust concentration, sliding distance and applied normal load. The abrasive wear resistance decreases with increase in normal load and increases with increasing coir dust content, because at higher coir dust loading,wear mechanism was dominated by reinforcement , which is less brittle than the epoxy matrix.The worn surface morphologies were examined by SEM and possible wear mechanisms has been discussed.en
dc.format.extent256395 bytes-
dc.subjectabrasive wearen
dc.subjectcoir dusten
dc.subjectepoxy resinen
dc.titleInvestigation on abrasive wear behavior of coir dust reinforced polymer Matrix compositesen
Appears in Collections:Conference Papers

Files in This Item:
File Description SizeFormat 
apsrt ful paper.pdf250.39 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.