DSpace@nitr >
National Institue of Technology- Rourkela >
Conference Papers >

Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/1244

Title: An Appropriate Tool for Optimizing theWorkspace of 3R Robot Manipulator
Authors: Panda, S
Mishra, D
Biswal, B B
Keywords: Constrained non linear minimization;
Genetic algorithm;
Robot workspace;
Sequential quadrataic programming,
goal attainment
Issue Date: 2009
Publisher: IEEE
Citation: 2009 World Congress on Nature and Biologically Inspired Computing, NABIC 2009; Coimbatore; 9 December 2009 through 11 December 2009; Category number CFP0995H; Code 79534; Article number 5393780, Pages 1156-1161
Abstract: Robotic manipulators with three-revolute (3R) positional configurations are very common in the industrial robots (IRs). The capability of a robot largely depends on the workspace (WS) of the manipulator apart from other parameters. With the constraints in mind the optimization of the workspace is of prime importance in designing the manipulator. The present work aims at obtaining an optimal design of manipulators with three-revolute joints. The optimization problem is formulated considering the workspace volume as the objective function, while constraints are imposed to control the total area. Subsequently the problem is solved using Sequential quadratic programming (SQP, fminmax, goal attainment, constrained non linear minimization) and genetic algorithms (GAs) and a comparision is made. The four different optimization techniques were used to solve numerical example imposing same condition to demonstrate the efficiency of the optimization processes. Numerical example is presented to v...
URI: http://dx.doi.org/10.1109/NABIC.2009.5393780
http://hdl.handle.net/2080/1244
Appears in Collections:Conference Papers

Files in This Item:

File Description SizeFormat
panda.pdf618KbAdobe PDFView/Open

Show full item record

All items in DSpace are protected by copyright, with all rights reserved.

 

Powered by DSpace Feedback