DSpace@nitr >
National Institue of Technology- Rourkela >
Journal Articles >

Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/1022

Full metadata record

DC FieldValueLanguage
contributor.authorMishra, S C-
contributor.authorDas, Satyabati-
contributor.authorSatapathy, Alok-
contributor.authorP V, Ananthapadmanabhan-
identifier.citationTribology Transactions, Volume 52 No 3 Pages 401—404en
description.abstractErosion wear behavior of fly ash–illmenite coating was studied using dry silica sand as an erodent. A plan of experiments based on the Taguchi technique was used to acquire the data in a controlled way. An orthogonal array and signal-to-noise ratio was employed to investigate the influence of the impact angle, the velocity, the size of the erodent, and the standoff distance (SOD) on erosion wear. The objective was to investigate which design parameter significantly affects the erosion wear. It was found that the impact angle is the most powerful factor influencing the erosion wear rate of the coating. Further, when erosive wear behavior of fly ash–illmenite coating was investigated at three impact angles (i.e., at 30◦, 60◦, 90◦), it was revealed that the impact angle is the prime factor and maximum erosion takes place at α = 90◦.en
format.extent138125 bytes-
publisherTaylor and Francisen
subjectCeramic Coatingen
subjectTaguchi Techniqueen
titleErosion Wear Analysis of Plasma Sprayed Ceramic Coating Using the Taguchi Techniqueen
Appears in Collections:Journal Articles

Files in This Item:

File Description SizeFormat
a.satapathy.pdf134KbAdobe PDFView/Open

Show simple item record

All items in DSpace are protected by copyright, with all rights reserved.


Powered by DSpace Feedback