Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/880
Full metadata record
DC FieldValueLanguage
dc.contributor.authorJena, H M-
dc.contributor.authorSahoo, B K-
dc.contributor.authorRoy, G K-
dc.contributor.authorMeikap, B C-
dc.date.accessioned2009-06-05T05:39:01Z-
dc.date.available2009-06-05T05:39:01Z-
dc.date.issued2009-
dc.identifier.citationWiley,Canadian journal of chemical engineering, 2009, vol. 87, no1, pp. 1-10en
dc.identifier.issn0008-4034-
dc.identifier.urihttp://hdl.handle.net/2080/880-
dc.description.abstractExperiments have been carried out to study the individual phase holdup characteristics in a cocurrent three-phase fluidized bed. An antenna type modified air sparger has been used in the gas-liquid distributor section, for uniform mixing of the fluids with the gas moving as fine bubbles to the fluidizing section. This arrangement also reduces the pressure drop encountered through a conventional distributor used for the purpose. To overcome the non-uniformity of flow through the column (i.e. the central region), a distributor plate with 20% open area has been fabricated with concentric circular punched holes of increased diameter from centre to the wall. Model equations have been developed by factorial design analysis for predicting various individual phase holdups.en
dc.format.extent793134 bytes-
dc.format.mimetypeapplication/pdf-
dc.language.isoen-
dc.publisherWileyen
dc.subjectFluidizationen
dc.subjectGas holdupen
dc.subjectLiquid holdupen
dc.subjectSolid holdupen
dc.subjectStatistical design analysisen
dc.subjectMultiphase flowen
dc.titleStatistical Analysis of the Phase Holdup Characteristics of a Gas-Liquid-Solid Fluidized Beden
dc.typeArticleen
Appears in Collections:Journal Articles

Files in This Item:
File Description SizeFormat 
jena.pdf774.54 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.