Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/3079
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBera, Tanusree-
dc.contributor.authorAcharya, S.K-
dc.date.accessioned2018-10-24T05:22:44Z-
dc.date.available2018-10-24T05:22:44Z-
dc.date.issued2018-09-
dc.identifier.citation6th Asia International Conference on Tribology (ASIATRIB 2018), Kuching, Malaysia, 17-20 September, 2018en_US
dc.identifier.urihttp://hdl.handle.net/2080/3079-
dc.descriptionCopyright of the documents belongs to the proceedings publisher.en_US
dc.description.abstractIn this study, the effects of weight fraction of cenosphere on dry sliding wear behavior of Al-Si12 matrix alloy particle reinforced composites, fabricated by squeeze casting technique was investigated. Wear tests were carried out on a pin-on-disc wear tester at 0.5235, 1.0472, 1.5708 and 2.0944 m/s sliding velocity under loads of 5, 10, 15 and 20 N against EN 31 steel disc. The results showed that the higher the load and the faster the sliding velocity are, the higher the wear rate is. The coefficient of friction of the matrix alloy and composites decreased with increase with the load.en_US
dc.subjectAl-Si12 matrix alloyen_US
dc.subjectCenosphereen_US
dc.subjectSqueeze castingen_US
dc.titleMechanical and dry sliding wear behavior of cenosphere particulate reinforced Al-Si12 matrix alloy composites produced by squeeze castingen_US
dc.typeArticleen_US
Appears in Collections:Conference Papers

Files in This Item:
File Description SizeFormat 
2018_ASIATRIB_SKAcharya_Mechanical.pdfPaper149.99 kBAdobe PDFView/Open
2018_ASIATRIB_SKAcharya_Mechanical_Presentation.pdfPresentation1.09 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.