Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/2782
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMukherjee, Payal-
dc.contributor.authorKaur, Tejinder-
dc.contributor.authorNamasivaya, Naveen S-
dc.contributor.authorArunachalam, Thirugnanam-
dc.date.accessioned2017-11-14T12:00:40Z-
dc.date.available2017-11-14T12:00:40Z-
dc.date.issued2017-10-
dc.identifier.citation6th Asian Biomaterials Congress (ABMC6), Thiruvananthapuram, Kerala, India, 25-27 October 2017en_US
dc.identifier.urihttp://hdl.handle.net/2080/2782-
dc.descriptionCopyright of this paper belongs to proceedings publisheen_US
dc.description.abstractChitosan (CS), a naturally occurring polysaccharide, is widely being used for medical and pharmaceutical applications owing to its biocompatibility and biodegradability. However, its brittle nature and weak mechanical properties often limit its application in the biomedical field. Therefore, the aim of the present study is to reduce the brittle nature of the CS films by addition of polyethylene glycol (PEG) and to further improve their mechanical properties by reinforcing with the polyether ether ketone (PEEK). Briefly, CS (2% w/v) was dissolved in 2% acetic acid solution and stirred overnight at 37˚C. PEG in the concentration of 1% w/v was added to the CS solution and stirred again for 6 h. In the CS-PEG composite, PEEK was added at concentrations of 0.1% and 0.5% w/w (w.r.t. CS) to develop CS-PEG-PEEK composites. Thus developed three different composites were named as CP (CS-PEG), CP 0.1 (CS-PEG-0.1% PEEK) and CP 0.5 (CS-PEG-0.5% PEEK). The composites were characterized by performing scanning electron microscopy (SEM), X-ray diffraction and Fourier transform infrared study. The contact angle measurement, swelling studies, degradation studies, hemocompatibility and protein adsorption studies were also performed. The mechanical properties of the composites were evaluated by performing tensile studies. The SEM micrographs showed well dispersion of PEG and PEEK in the CS matrix. The CP showed lowest contact angle values, whereas, the addition of PEEK increased the contact angle values of the composites. The PEEK containing samples (CP 0.1 and CP 0.5) showed less swelling percentage and degradation rate than the control (CP). All the samples exhibited <5% hemolysis values confirming their hemocompatible nature. The adsorption of protein on all the composites indicated their suitability for biomedical applications. Further, the reinforcement of PEEK in CS-PEG matrix improved the mechanical properties of the composites many folds. The above studies confirm the potential of CS-PEG-PEEK composites for biomedical implant applications.en_US
dc.subjectChitosanen_US
dc.subjectPolyethylene glycolen_US
dc.subjectPolyether ether ketoneen_US
dc.subjectCompositeen_US
dc.subjectDegradationen_US
dc.subjectBiomedical applicationsen_US
dc.titlePolyether Ether Ketone Reinforced Chitosan-Polyethylene Glycol Composites for Biomedical Applicationen_US
dc.typePresentationen_US
Appears in Collections:Conference Papers

Files in This Item:
File Description SizeFormat 
2017_ABMC6_PMukherjee_Poster.pdfPoster775.34 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.