Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/2538
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSrivastava, A-
dc.contributor.authorAbhishek, K-
dc.contributor.authorDatta, S-
dc.contributor.authorUpadhyay, C-
dc.contributor.authorMahapatra, S S-
dc.date.accessioned2016-08-30T11:31:23Z-
dc.date.available2016-08-30T11:31:23Z-
dc.date.issued2016-08-
dc.identifier.citationNational Level Symposium on Materials Characterization and Manufacturing (MCM-2016), Taleigao Plateau, Goa, 18-19 August 2016en_US
dc.identifier.urihttp://hdl.handle.net/2080/2538-
dc.description.abstractThe machining behaviour of Aluminium alloy 6061 using Electro-Discharge Machining (EDM) is aimed to be investigated by considering three different tool material viz. Copper, Graphite and Brass. The machinability of Aluminium alloy 6061 in EDM is to be analysed in terms of Material Removal Rate (MRR), surface roughness (Ra), and thickness of the recast layer. By considering the following EDM process parameters viz. gap voltage, peak discharge current, pulse-on time, duty factor and dielectric flashing circulation pressure kept at constant values; three different EDM operations are to be carried out on Aluminium alloy 6061 by using aforesaid three electrodes, respectively. Analysis of Scanning Electron Microscopy (SEM) is to be carried out to retrieve surface irregularities that are expected to be produced on EDMed end product of Aluminium alloy 6061. In addition to this, Energy-dispersive X-ray spectroscopy (EDAX) elemental spectra for as received base metal as well as EDMed Aluminium alloy 6061 is to be examined to understand change in chemical composition of the workpiece during EDM operation. Results obtained thereof have also been compared with micro-hardness test data obtained at the top surface of Al6061 EDMed end product.en_US
dc.subjectAluminium alloy 6061en_US
dc.subjectElectro-Discharge Machining (EDM)en_US
dc.subjectMaterial Removal Rate (MRR)en_US
dc.subjectSurface roughness (Ra)en_US
dc.subjectSurface Crack Density (SCD)en_US
dc.subjectRecast layeren_US
dc.subjectScanning Electron Microscopy (SEM)en_US
dc.subjectEnergy-dispersive X-ray spectroscopy (EDAX)en_US
dc.titleEffect of Variation of Electrode Material on Machining Performance of Al 6061 During EDM Operationen_US
dc.typePresentationen_US
Appears in Collections:Conference Papers

Files in This Item:
File Description SizeFormat 
2016_MCM_Effect.pdf2.11 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.