Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/2519
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKarak, S K-
dc.contributor.authorSamataray, R-
dc.contributor.authorDąbrowski, F-
dc.contributor.authorCiupinski, L-
dc.date.accessioned2016-07-21T05:12:24Z-
dc.date.available2016-07-21T05:12:24Z-
dc.date.issued2016-07-
dc.identifier.citation23rd International Symposium on Metastable, Amorphous and Nanostructured Materials(ISMANAM), Nara, Japan, 3-8 July 2016,en_US
dc.identifier.urihttp://hdl.handle.net/2080/2519-
dc.description.abstract45.0Zr-30Fe-10Cr-5Cu-5.0Ni-5.0Ti (alloy A), 44.0Zr-30Fe-10Cr-5Cu-5.0Ni-5.0Ti-1.0Y2O3 (alloy B), 45.0Zr-25Fe-10Cr-10Cu-5.0Ni-5.0Ti (alloy C) and 44.0Zr-25Fe-10Cr-10Cu-5.0Ni-5.0Ti- 1.0Y2O3 (alloy D) alloys (all in wt %) by solid state mechanical alloying route and consolidation the milled powder by pulse plasma sintering [1] (PPS) at 1173 K (900°C), 1223 K (950°C) and 1273 K (1000°C) using 75 MPa uniaxial pressure applied for 5 min and 70 kA pulse current at 3 Hz pulse frequency. Subsequently, an extensive effort has been undertaken to characterize the microstructural and phase evolution by X-ray diffraction (XRD), scanning and transmission electron microscopy (SEM/TEM) and energy dispersive spectroscopy (EDS). Mechanical properties including hardness, compressive strength, Young’s modulus and fracture toughness were determined using micro/nano-indentation unit and universal testing machine. The density of the alloys increases with increasing sintering temperature and shows maximum at 1000C temperature. Similar kind of trends has been found in hardness measurements. The maximum hardness found in alloy C sintered at 1000C (9.5 GPa) and minimum in alloy A sintered at 900C (4.5 GPa). Besides superior mechanical strength, the novelty of these alloys lie in the unique microstructure comprising uniform distribution of either nanomertic (100 nm) oxide (Y2O3) particles Zr- Fe matrix useful for grain boundary pinning and creep resistance. Fig. 1 shows the microstructure of alloy A sintered at 1000C by PPS method predicts multimodal grain structure with larger grain size of 5m to smaller grain size of 300nm. This also evident that there is very less porosity (0.25 %) of the sample sintered at higher sintering temperature.en_US
dc.subjectNano-Y2O3en_US
dc.subjectZr-Fe Alloysen_US
dc.subjectMechanical Alloyingen_US
dc.subjectPulse Plasma Sinterien_US
dc.subjectSynthesisen_US
dc.titleSynthesis and Characterization of Nano-Y2O3 Dispersed Zr-Fe Alloys by Mechanical Alloying and Pulse Plasma Sinteringen_US
dc.typePresentationen_US
Appears in Collections:Conference Papers

Files in This Item:
File Description SizeFormat 
2016_ISMANAM_SKKarak_Synthesis.pdf11.52 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.