Please use this identifier to cite or link to this item:
http://hdl.handle.net/2080/2448Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | Dehury, R K | - |
| dc.contributor.author | Teja, V C S | - |
| dc.contributor.author | Mondal, A K | - |
| dc.date.accessioned | 2016-02-16T05:07:32Z | - |
| dc.date.available | 2016-02-16T05:07:32Z | - |
| dc.date.issued | 2016-02 | - |
| dc.identifier.citation | International Conference and Expo on Magnesium (iMagCon 2016), Chennai, India, 4th-6th February 2016 | en_US |
| dc.identifier.uri | http://hdl.handle.net/2080/2448 | - |
| dc.description | Copyright belongs to proceeding publisher | en_US |
| dc.description.abstract | MRI230D is a magnesium alloy containing Ca as one of the primary alloying element to enhance the creep resistance by forming C36 intermetallic lamellar phase along the grain boundaries. Creep behavior of MRI230D alloy was investigated using the impression creep technique. The tests were carried under constant temperature (423 – 513K) and constant stress (60 – 80MPa) by impressing a cylindrical punch on the specimen. From the microstructure and XRD pattern results of as-cast and after creep test specimens observed that the creep resistance of the alloy is mainly due to the increased volume fraction of C36 phase along grain boundaries. | en_US |
| dc.subject | Magnesium alloy | en_US |
| dc.subject | MRI230D | en_US |
| dc.subject | Creep | en_US |
| dc.subject | Microstructure | en_US |
| dc.subject | Precipitation | en_US |
| dc.title | Creep of die-cast MRI230D Mg alloy | en_US |
| dc.type | Article | en_US |
| Appears in Collections: | Conference Papers | |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| Ranjit.kumar_Creep of die-cast_2016.pdf | 660.43 kB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.