Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/1912
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDas, A K-
dc.contributor.authorDhal, J P-
dc.contributor.authorPanda, R K-
dc.contributor.authorMishra, S C-
dc.contributor.authorSen, S-
dc.date.accessioned2013-04-12T05:06:27Z-
dc.date.available2013-04-12T05:06:27Z-
dc.date.issued2013-
dc.identifier.citationJournal of Materials and Metallurgical Engineering Volume 3, Issue 1, ISSN: 2231 - 3818en
dc.identifier.issn2231 - 3818-
dc.identifier.urihttp://hdl.handle.net/2080/1912-
dc.descriptionCopyright for this article belongs to STM Journals.en
dc.description.abstractIn the present work, austempering is carried out for three different grades (Unalloyed, copper alloyed and Nickel alloyed) of ductile iron. After that the variation of mechanical properties (Hardness, Tensile strength and Elongation) and microstructure of the austempered ductile iron (ADI) with alloying elements (Copper and Nickel) and austempering process variables (austempering temperature and austempering time) were studied. It is found that, with increasing austempering time hardness, tensile strength and elongation are increasing but with increasing austempering temperature hardness and tensile strength are decreasing and elongation increasing. Austempered ductile iron with alloying element (Cu or Ni) is showing some improved mechanical properties such that: higher strength, hardness and lower elongation, than the unalloyed austempered ductile iron. In Microstructure, higher ferrite fraction is observed for higher austempering time and higher austenite fraction is observed for higher austempering temperature, for all the three grades of austempered ductile iron.en
dc.format.extent748530 bytes-
dc.format.mimetypeapplication/pdf-
dc.language.isoen_US-
dc.publisherSTM Journalsen
dc.subjectaustemperingen
dc.subjectaustempered ductile iron (ADI)en
dc.subjectausferriteen
dc.subjecttensile strengthen
dc.subjecthardnessen
dc.subjectelongationen
dc.titleEffect of Alloying Elements and Processing Parameters on Mechanical Properties of Austempered Ductile Ironen
dc.typeArticleen
Appears in Collections:Journal Articles

Files in This Item:
File Description SizeFormat 
toHemanta-upload.pdf730.99 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.