Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/1648
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSahu, H B-
dc.date.accessioned2012-03-26T12:31:16Z-
dc.date.available2012-03-26T12:31:16Z-
dc.date.issued2011-12-
dc.identifier.citation34th Int. Conf. on Safety in Mines Research institutes, New Delhi, December 7-10, 2011en
dc.identifier.urihttp://hdl.handle.net/2080/1648-
dc.descriptionCopyright belongs to proceeding publisheren
dc.description.abstractThe first step to emergency preparedness and maintaining a safe workplace is defining and analyzing hazards. Although all hazards should be addressed, resource limitations usually do not allow this to happen at one time. Hazard identification and risk assessment can be used to establish priorities so that the most dangerous situations are addressed first and those least likely to occur and least likely to cause major problems can be considered later. Keeping this in mind, hazard identification and risk assessment was carried out at a limestone mine. The important hazards, their risks and the control measures that can be adopted have been presented in this paper.en
dc.format.extent821956 bytes-
dc.format.mimetypeapplication/pdf-
dc.language.isoen-
dc.subjectHazard Identificationen
dc.subjectRisk Assessmenten
dc.subjectConsequenceen
dc.subjectLikelihooden
dc.subjectRisk Ratingen
dc.titleHazard identification and risk analysisen
dc.typePresentationen
Appears in Collections:Conference Papers

Files in This Item:
File Description SizeFormat 
CSMRE.pdf802.69 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.