Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/1602
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSwain, S K-
dc.contributor.authorSen, S-
dc.date.accessioned2012-02-01T10:40:16Z-
dc.date.available2012-02-01T10:40:16Z-
dc.date.issued2011-06-
dc.identifier.citationJournal of Metallurgy and Materials Science, Vol. 53, No. 2, April-June 2011, pp. 133-137en
dc.identifier.issn0972-4257-
dc.identifier.urihttp://hdl.handle.net/2080/1602-
dc.descriptionCopyright for this paper belongs to National Metallurgical Laboratory, Jamshedpuren
dc.description.abstractDuctile Iron castings with section thickness 60mm, 70mm & 80mm were produced using manufacturing process in which the chemical composition was adjusted to guarantee the formation of spheroidal graphite during solidification. Simultaneously other parameters like carbon equivalent, tapping temperature, inoculation and magnesium residuals were monitored. Microstructure and its constituents of these thick wall castings were characterized using an image analyzer. Matrix structure and graphite forms were investigated as a function of section thickness. Pearlite content, nodule count and nodularity decreases with increasing section thickness where as nodule size increases.en
dc.format.extent150920 bytes-
dc.format.mimetypeapplication/pdf-
dc.language.isoen-
dc.publisherNational Metallurgical Laboratoryen
dc.subjectMicrostructureen
dc.subjectSpheroidal graphite ironen
dc.subjectManufacturing processen
dc.titleStudy of microstructure of thick wall ductile iron castingsen
dc.typeArticleen
Appears in Collections:Journal Articles

Files in This Item:
File Description SizeFormat 
133-137.pdf147.38 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.