Please use this identifier to cite or link to this item: http://hdl.handle.net/2080/1357
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAireddy, H-
dc.contributor.authorMishra, S C-
dc.date.accessioned2011-01-25T09:19:16Z-
dc.date.available2011-01-25T09:19:16Z-
dc.date.issued2010-12-
dc.identifier.citationInternational Symposium for Research Scholars on Metallurgy, Materials Science and Engineeringen
dc.identifier.urihttp://hdl.handle.net/2080/1357-
dc.descriptionCopyright belongs to Proceedings Publisheren
dc.description.abstractPolymer composite was prepared by hand lay out method using epoxy resin as the matrix and coir dust as the reinforcement. Composites of four different compositions (amount of reinforcements) are made. The density, void fraction, hardness, flexural strength, and the dielectric constant of the composites were evaluated. It was found that , the flexural strength and hardness are decreases with increasing the amount of reinforcement due to the increment in the void fraction and softness of the reinforcement material. The density decreases with increasing reinforcement content. The void fraction shows that increasing trend with increase reinforcement amount and the dielectric constant of the composite material varies from 6.29 to 11.84 with the composition.en
dc.format.extent354368 bytes-
dc.format.mimetypeapplication/pdf-
dc.language.isoen-
dc.subjectPolymer compositeen
dc.subjectVoid fractionen
dc.subjectHardnessen
dc.subjectDielectric lossen
dc.subjectPolarizationen
dc.titleProcessing and properties of Bio-waste reinforced polymer compositesen
dc.typeArticleen
Appears in Collections:Conference Papers

Files in This Item:
File Description SizeFormat 
cc-conf.pdf346.06 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.