**Date of Issue** | Title |
Authors |

**1982 ** | Water Jet Machining: A state of art | *Ray, P K* |

**1987 ** | Some Studies On Abrasive Jet Machining. | *Ray, P K*; *Paul, A K* |

**2000 ** | Fatigue crack growth delay following overload | *Verma, B B*; *Kumar, A*; *Ray, P K* |

**2000 ** | Effect of thermomechanical treatment parameters on mechanical properties of duplex ferriteâ€“martensite structure in dual phase steel | *Panda, A K*; *Ray, P K*; *Ganguly, R I* |

**2002 ** | Influence of Heat Treatment Parameters on Structure and Mechanical Properties of an HSLA-100 Steel | *Ray, P K*; *Ganguly, R I*; *Panda, A K* |

**2002 ** | Spot heating induced fatigue crack growth retardation | *Ray, P K*; *Verma, B B*; *Mohanthy, P K* |

**2002 ** | Fatigue crack growth retardation in spot heated mild steel sheet | *Verma, B B*; *Ray, P K* |

**2002 ** | Investigations on the microstructure and quantification of mechanical properties of a heat treated Cu-bearing HSLA-80 steel | *Ray, P K*; *Ganguly, R I*; *Panda, A K* |

**2002 ** | On the number 495 (A constant similar to Kaprekar's Constant) | *Ray, P K* |

**2003 ** | Mechanical Behaviour of Hygrothermally Conditioned FRP Composites After Thermal Spikes | *Ray, P K*; *Bhushan, A*; *Bera, T*; *Ranjan, R*; *Mohanty, U*; *Vadhera, S*; *Ray, B C* |

**2003 ** | Optimization of Mechanical Properties of a Heat-treated Cu-bearing HSLA-80 Steel | *Ray, P K*; *Ganguly, R I*; *Panda, A K* |

**2003 ** | Optimization of mechanical properties of an HSLA-100 steel through control of heat treatment variables | *Ray, P K*; *Ganguly, R I*; *Panda, A K* |

**2004 ** | Assessment of Interlaminar Shear Strength of Hybrid Composites Subjected to a Fluctuating Humid Environment | *Mula, S*; *Ray, B C*; *Ray, P K* |

**2004 ** | Determination of recrystallization stop temperature (TR) of an HSLA steel | *Ray, P K*; *Ganguly, R I*; *Panda, A K* |

**2005 ** | Co-balancing Numbers and Co-balancers | *Panda, G K*; *Ray, P K* |

**2005 ** | A study on spot heating induced fatigue crack growth retardation | *Ray, P K*; *Ray, P K*; *Verma, B B* |

**2005 ** | A study on spot heating induced fatigue crack growth retardation | *Ray, P K*; *Ray, P K*; *Verma, B B* |

**2006 ** | Comparison of constants in wheeler model under single overload and spot heating conditions | *Joni, A*; *Ray, P K*; *Mohanty, J R*; *Verma, B B* |

**2006 ** | Determination of Crack Coefficients for a Single Edge-Notch Tension Specimen Using Franc2D Program | *Mohanty, J R*; *Joni, A*; *Ray, P K*; *Verma, B B* |

**2006 ** | Modelling And Development Of A Horizontal Vibratory Rod Mill For Mechanical Alloying: A First Report | *Ray, P K*; *Ray, P K*; *Sundar Raja, V*; *Murty, B S*; *Chattopadhyay, K* |

**2006 ** | Modelling And Development Of A Horizontal Vibratory Rod Mill For Mechanical Alloying: A First Report | *Ray, P K*; *Ray, P K*; *Sundar Raja, V*; *Murty, B S*; *Chattopadhyay, K* |

**2006 ** | Prior Thermal Spikes and Thermal Shocks on Mechanical Behavior of Glass Fiber-epoxy Composites | *Ray, B C*; *Mula, S*; *Bera, T*; *Ray, P K* |

**2006 ** | Effects of Hydrothermal Aging on Mechanical Behavior of Sub-zero Weathered GFRP Composites | *Mula, S*; *Bera, T*; *Ray, P K*; *Ray, B C* |

**2007 ** | Effect of hygrothermal shock cycles on interlaminar shear strength of hybrid composites | *Ray, P K*; *Mula, S*; *Mohanty, U K*; *Ray, B C* |

**2007 ** | Effects of Thermal Shocks and Thermal Spikes on Hygrothermal Behavior of Glass-Polyester Composites | *Bera, T*; *Mula, S*; *Ray, P K*; *Ray, B C* |

**2008 ** | Evaluation of overload-induced fatigue crack growth retardation parameters using an exponential model | *Mohanty, J R*; *Verma, B B*; *Ray, P K* |

**2008 ** | A comparative study on estimation techniques with applications to power signal frequency | *Subudhi, B*; *Ray, P K*; *Mohanty, S R*; *Panda, A M* |

**2008 ** | Parameter Estimation Techniques Applied to Power Networks | *Subudhi, B*; *Ray, P K*; *Panda, A M*; *Mohanty, S R* |

**2009 ** | Prediction of residual fatigue life under interspersed mixed-mode (I and II) overloads by Artificial Neural Network | *Mohanty, J R*; *Parhi, D R K*; *Ray, P K*; *Verma, B B* |

**2009 ** | Application of Artificial Neural Network for Predicting Fatigue Crack Propagation Life of Aluminum Alloys | *Mohanty, J R*; *Verma, B B*; *Parhi, D R K*; *Ray, P K* |

**2009 ** | Prediction of fatigue life with interspersed mode-I and mixed-mode (I and II) overloads by an exponential model: Extensions and improvements | *Mohanty, J R*; *Verma, B B*; *Ray, P K* |

**2009 ** | Estimation of Power System Harmonics Using Hybrid RLS-Adaline and KF-Adaline Algorithms | *Subudhi, B*; *Ray, P K* |

**2009 ** | A Comparative Study on Different Power System Frequency Estimation Techniques | *Subudhi, B*; *Ray, P K*; *Mohanty, S R*; *Panda, A M* |

**2009 ** | Application of Artificial Neural Network for Predicting Fatigue Crack Propagation Life of Aluminum Alloys | *Mohanty, J R*; *Verma, B B*; *Parhi, D R K*; *Ray, P K* |

**2009 ** | Prediction of fatigue crack growth and residual life using an exponential model: Part II (mode-I overload induced retardation) | *Mohanty, J R*; *Verma, B B*; *Ray, P K* |

**2009 ** | Prediction of fatigue crack growth and residual life using an exponential model: Part I (constant amplitude loading) | *Mohanty, J R*; *Verma, B B*; *Ray, P K* |

**2010 ** | Application of artificial neural network for fatigue life prediction under interspersed mode-I spike overload | *Mohanty, J R*; *Verma, B B*; *Ray, P K*; *Parhi, D R K* |

**2010 ** | Determination of fatigue crack growth rate from experimental data: A new approach | *Mohanty, J R*; *Verma, B B*; *Ray, P K* |

**2010 ** | Prediction of mode-I overload-induced fatigue crack growth rates using neuro-fuzzy approach | *Mohanty, J R*; *Verma, B B*; *Ray, P K*; *Parhi, D R K* |

**Apr-2013 ** | A VLLMS based Harmonic Estimation of Distorted Power System Signals and Hybrid Active Power Filter Design | *Ray, P K*; *Subudhi, B* |